Grandad’s Mash Builder & Mash Calculator
Choose a grain bill, calculate ingredient proportions, learn brewing terminology, and print a personalized mash planning sheet—with Grandad’s guidance along the way.
Build Your Mash Planning Sheet
Start with one of Grandad’s sample grain combinations or customize your own. The calculator works out grain percentages and weights; it does not claim that an arbitrary combination is a tested recipe.
Grandad Explains: What Is Strike Water?
Strike water is water warmed before grain is added. When cooler grain is mixed in, the temperature usually drops. The starting water temperature therefore may need to be warmer than the target mash temperature in a tested brewing recipe.
Here’s a simple example: With grain at 70°F, a recipe target of 152°F, and a water-to-grain ratio of 1.5 quarts per pound, the calculator’s simplified heat-balance formula estimates a starting water temperature of about 163°F.
Example only, not a recipe: This estimate assumes no heat loss to the vessel and uses a simplified grain heat-capacity approximation. Actual temperatures vary with equipment and ingredients. The calculator does not determine a suitable target for your grain bill.
Optional: Calculate my strike-water estimate ?
Enter the target temperature from a verified recipe, the current grain temperature, and the recipe’s water-to-grain ratio. The estimate does not account for heat absorbed by your mash vessel or other losses.
Beginner Mash Calculator Examples
These short examples explain what the calculator can tell you—and what requires a recipe-specific decision.
Corn Mash Bill Example
With 10 lb of grain and an 80% corn / 20% malted barley selection, the grain list is 8 lb corn and 2 lb malted barley. That is grain-bill arithmetic, not a validated corn mash recipe.
Wheat Mash Bill Example
At 70% wheat and 30% malted barley, a 10 lb grain bill contains 7 lb wheat and 3 lb malted barley. Grain preparation and starch conversion depend on the actual recipe.
What Is Strike Water?
Strike water is heated water added to grain. Because grain is usually cooler than the water, the mixed mash temperature changes. Use a verified target temperature and confirm the result with a thermometer.
Still Size vs. Mash Size
A 5-gallon still does not mean a 5-gallon fermentation batch is the correct amount to load. Fermenter headspace and the equipment manufacturer’s operating limits are separate considerations.
Mash Builder FAQs
What is a mash bill?
A mash bill is the list of grains and their proportions. It does not by itself tell you the correct water quantity, temperatures, enzymes, or fermentation schedule.
How do I calculate grain percentages?
Multiply the total grain weight by each ingredient’s percentage expressed as a decimal. For example, 80% of 10 lb is 8 lb.
Can I use any grain combination?
You can explore combinations mathematically, but not every combination is a functional or tested recipe. Different grains may require different processing and starch-conversion methods.
Does this calculator determine safe still fill levels?
No. Follow the specific equipment manufacturer’s requirements and applicable laws. Still nominal capacity does not establish safe working fill volume.
Is home distilling beverage alcohol legal in the United States?
Federal law generally prohibits producing distilled spirits for beverage purposes at home without the required federal authorization, even where state rules differ. See TTB distilled spirits guidance.